LL
Cast Iron
- Joined
- Feb 23, 2005
- Location
- Chapel Hill, NC, 27516
Yuasa dividing head Stock# 550 032
Yuasa International
Made In Japan
Has these numbers stamped on body: 8075
http://www.yuasa-intl.com/550030.html
J&L Catalog page# 1053W
http://catalogs.shoplocal.com/jlindustrial/index.aspx?storeid=1038424&circularid=7228&jlpass=1053&loggedin=false&itemcount=0&jsessionid=e3zhz0k5sb2bdlaubiwsfevmcqfcyiv0&pagenumber= 1075
Model: 550-032
Spindle thread (mm): M55 X P3
Size: 10"
Center hole taper: B&S 10
Center height: 5.236"
Fits optional Yuasa chuck: 585-108 8.25"
Good condition, has some rust
Has taper shank arbor threaded (fine) on OD of big end with small round plate screwed onto it; small end has threaded ID, presumably for drawbar. This
fits in the center hole of the head.
Has one plate
Missing crank handle
No chuck
No tailstock
Head swivels smoothly on axis
Turns smoothly and easily with very little backlash
Weighs approximately 85 pounds
I hope to have a number of good photos of this tool available for viewing sometime this week and a price on it in a few days. I also have a Hartford Super Spacer with 8" 3-jaw chuck I am thinking of selling.
Lawrence
[email protected]
Yuasa International
Made In Japan
Has these numbers stamped on body: 8075
http://www.yuasa-intl.com/550030.html
J&L Catalog page# 1053W
http://catalogs.shoplocal.com/jlindustrial/index.aspx?storeid=1038424&circularid=7228&jlpass=1053&loggedin=false&itemcount=0&jsessionid=e3zhz0k5sb2bdlaubiwsfevmcqfcyiv0&pagenumber= 1075
Model: 550-032
Spindle thread (mm): M55 X P3
Size: 10"
Center hole taper: B&S 10
Center height: 5.236"
Fits optional Yuasa chuck: 585-108 8.25"
Good condition, has some rust
Has taper shank arbor threaded (fine) on OD of big end with small round plate screwed onto it; small end has threaded ID, presumably for drawbar. This
fits in the center hole of the head.
Has one plate
Missing crank handle
No chuck
No tailstock
Head swivels smoothly on axis
Turns smoothly and easily with very little backlash
Weighs approximately 85 pounds
I hope to have a number of good photos of this tool available for viewing sometime this week and a price on it in a few days. I also have a Hartford Super Spacer with 8" 3-jaw chuck I am thinking of selling.
Lawrence
[email protected]