Tsugami/Rem Sales to Demonstrate Machines including 9-Axis and LaserSwiss at Smart Manufacturing Experience

March 9, 2018 5:20 pm

Rem Sales to exhibit the Tsugami BW129Z, SS327-5AX, S206, and SS207-5AX LaserSwiss in Boston, April 30-May 2

Windsor, Conn. –  Tsugami/Rem Sales, the exclusive North American importer of Precision Tsugami machine tools, announced today that it will demonstrate the Tsugami BW129Z, the Tsugami SS327-5AX, the Tsugami S206, and the Tsugami SS207-5AX LaserSwiss at the Smart Manufacturing Experience in Boston, Mass., April 30-May 2, 2018.

The Northeastern distributor of Tsugami CNC Swiss type machines, The Robert E. Morris Company, will be located in booth #351 at the Smart Manufacturing Experience and will feature two Tsugamis in their booth as well. The Tsugami M08SY and the Tsugami VA2 will run live demonstrations.

The Tsugami M08SY is a heavy-duty turning center with Y-Axis used to perform highly complex machining, such as turning, drilling, boring, cross-drilling and CNC milling. Both the main and back spindles are equipped with integral built-in spindles which minimize vibration and provide superior responsiveness for heavy duty cutting and fine finishing of work pieces.

The Tsugami VA2 is a high speed, high accuracy vertical machining center with a compact footprint.

Featured Machines in Tsugami/Rem Sales booth #341:

Tsugami BW129Z: A 12mm, 9-axis split-slide CNC precision automatic lathe with 3 path control that slashes cycle times and produces highly complex parts.

Tsugami SS327-5AX: A 32mm, 7-axis sliding headstock swiss type lathe with servo driven B-axis. This machines is convertible, meaning that it can be run as a traditional sliding headstock swiss type lathe using the guide bushing, or run without the guide bushing with the help of an optional chucker kit.

Tsugami S206: A 20mm, This CNC Lathe is capable of simultaneous machining of complex parts and includes a backworking Y-axis for additional capability.  Modular tool zones and live-tool capacity (15) enhance the performance of this machine’s ability to cut parts in one set-up.

Tsugami SS207-5AX LaserSwiss: A 20mm, 7-axis sliding headstock swiss type lathe with B-axis and LaserSwiss technology…

Tsugami/Rem Sales will demonstrate the Tsugami SS207-5AX LaserSwiss which combines Swiss style machining with laser cutting on one machine, allowing manufacturers to perform Swiss turning and laser cutting operations with a single setup. All operations are programmed and driven from the machine’s Fanuc 31i-B5 control. The laser nozzle standoff adjustment is NC controlled, and the laser’s power level, frequency, pulse width, and lens focus are all immediately adjustable. The SS207-5AX LaserSwiss holds 33 tools, plus the SPI Fiber Laser, which is available in 250W or 400W configurations.

“The SS2017-5AX LaserSwiss machine is a 7-axis Swiss Turn with a Servo-driven B-axis. The B-axis live tools cut in coordination with the C axis, facilitating the ability to quickly cut precise angles and sculpted contours,” Tsugami/Rem Sales Vice President Michael Mugno said.

To see live cutting demos of these machines at the Smart Manufacturing Experience, visit the Tsugami/Rem Sales booth, #341 and our Northeast distributor, Robert E. Morris Company in booth #351. The show runs April 30-May 2 at the Boston Convention Center in Boston, Mass.

Manufacturers unable to attend the show are invited to schedule private machine tool demonstrations at the Tsugami/Rem Sales headquarters in Windsor, Conn. by contacting the Robert E. Morris Company or Tsugami/Rem Sales directly.

About Tsugami/Rem Sales

Tsugami/Rem Sales (www.remsales.com) has been the exclusive North American importer of Precision Tsugami machine tools since 1978. A division of Morris Group, Inc. of Windsor, Connecticut, Rem Sales sells new Tsugami machine tools via national distribution channels and direct sales agents. The company also provides application engineering, service and customer training.

About Morris Group, Inc.

Morris Group, Inc. (http://www.morrisgroupinc.com), one of North America’s largest machine tool supply networks, owns fifteen independently operated business units. It supplies CNC machine tools and related technology and services to manufacturers representing virtually every industry segment. Morris Group, Inc. is headquartered in Windsor, Connecticut, home of its founding company, The Robert E. Morris Company, which has served the manufacturing industry since 1941.

Leave a Reply