Awleaphart
Aluminum
- Joined
- Mar 16, 2019
Hello everyone,
I have picked up a Lansing P15-15"x40" lathe and can't seam to find a manual anywhere on the web. With that said I'm trying to figure out the spindle bore taper type and taper size or number. At the very back it measures 2" and on the chuck side it measure 2.17". I tried to measure about 3" or 4" down the spindle but not getting a good measurement. It looks to have two grooves inside the spindle about 1/2" wide. If anyone knows what the taper is or maybe direct me to somebody or place that might have a manual I would apprentice it.
Thanks
A Leaphart
I have picked up a Lansing P15-15"x40" lathe and can't seam to find a manual anywhere on the web. With that said I'm trying to figure out the spindle bore taper type and taper size or number. At the very back it measures 2" and on the chuck side it measure 2.17". I tried to measure about 3" or 4" down the spindle but not getting a good measurement. It looks to have two grooves inside the spindle about 1/2" wide. If anyone knows what the taper is or maybe direct me to somebody or place that might have a manual I would apprentice it.
Thanks
A Leaphart