I'm getting ready to paint an old Steptoe mill with Macropoxy. Did my SB lathe with it a couple of years ago...paint has been stored in conditioned shop, did some small parts a few weeks ago and was surprised to find it's still "fine".
The lathe I did by brush... finish basically sucked, but I was (and still am) more interested in durability than appearance. Just wondering if this can be effectively thinned, and sprayed with a regular cup gun satisfactorily. The viscosity of the stuff suggests that a high-pressure airless would be required.
Should I just stick with brush/roller application?
The lathe I did by brush... finish basically sucked, but I was (and still am) more interested in durability than appearance. Just wondering if this can be effectively thinned, and sprayed with a regular cup gun satisfactorily. The viscosity of the stuff suggests that a high-pressure airless would be required.
Should I just stick with brush/roller application?