SBLatheman
Titanium
- Joined
- Jul 7, 2008
- Location
- South Bend, In
Wiring motor/ switch help...Please
This motor is on a Heavy 10 that I bought. The previous owner had replaced the 3-phase motor with this Dayton, wired to just run forward(220v 1-phase). I want it to also reverse, using the drum switch.
I have wired many machines, but not with this type of motor.
220volt single phase
Cutler Hammer drum switch
Thanks in advance
Ted
This motor is on a Heavy 10 that I bought. The previous owner had replaced the 3-phase motor with this Dayton, wired to just run forward(220v 1-phase). I want it to also reverse, using the drum switch.
I have wired many machines, but not with this type of motor.
220volt single phase
Cutler Hammer drum switch
Thanks in advance
Ted