ronaldinho_07
Aluminum
- Joined
- May 23, 2016
- Location
- VietNam
I have just bought a 2002 Integrex 300 ll sy without knowing the condition of the machine.
And suddenly,i have heard that the machine was flooded ,almost 1/2 machine height...
here some pics
this is the rebuilt thread,i am not a expert ..i am just and end user.Trying to bring the machine back to working condition
Hoping you guys can help me
main chuck is out..
and draw bar
06/03 update:
before disassembly the main spind,i have asked a guy for power on the machine.Luckily these drive are still fine,its on the top of the machine.
Main CPU (640MT fusion is going out for parameter restore)
and here the bad parts
Hoping to have any advices for this spindle,its all with dust.HAVE NOT POWERED ON THE SPIND YET
this will be a long story to tell
And suddenly,i have heard that the machine was flooded ,almost 1/2 machine height...
here some pics
this is the rebuilt thread,i am not a expert ..i am just and end user.Trying to bring the machine back to working condition
Hoping you guys can help me
main chuck is out..
and draw bar
06/03 update:
before disassembly the main spind,i have asked a guy for power on the machine.Luckily these drive are still fine,its on the top of the machine.
Main CPU (640MT fusion is going out for parameter restore)
and here the bad parts
Hoping to have any advices for this spindle,its all with dust.HAVE NOT POWERED ON THE SPIND YET
this will be a long story to tell
Last edited: