bentwrench
Cast Iron
- Joined
- Oct 25, 2007
- Location
- North Dakota
I bought this Gorton 0-16 with a bunch of tooling. I did not see everything until I got it all unpacked at home. The machine is beautiful condition, very little backlash on the screws, ways look vice, spindle spins like its brand new, just very well cared for machine. It came with a Hardinge vise, missing the swivel base and mounted to a plate. This machine uses the Gorton collets but there is full set with some extras, and some custom made tooling. Face mills, saw holders,formtools, and small diameter boring heads all with integral Gorton tapers. Some of these tools are even hardened and ground. Previous owner must have been doing some interesting work. They made Vernier scales for the x and y feed dials. Also came with boxes of tee nuts and studs and hold down parts vintage wrenches etc. Very neat machine and I figured you guys would find this interesting.
Finally got pictures to upload... here is some of the tooling.
Finally got pictures to upload... here is some of the tooling.
Last edited: