Hi All,
Need a little help.
Attached is one of the strips which we are machining.
OP1 includes Overall outer boundary machining, facing side one, drilling/boring these holes. So most work is done. Only remaining is removing extra material in OP 2. Highlighted in blue color.
This is a job where sizes are many, individual qty is less to justify dedicated OP 2 fixture cost. All those go in a set.
Again, making identical soft jaws won't be justifiable.
Lengths vary from 4" and go all the way upto 10".
Suggestions for OP 2 please ?
Need a little help.
Attached is one of the strips which we are machining.
OP1 includes Overall outer boundary machining, facing side one, drilling/boring these holes. So most work is done. Only remaining is removing extra material in OP 2. Highlighted in blue color.
This is a job where sizes are many, individual qty is less to justify dedicated OP 2 fixture cost. All those go in a set.
Again, making identical soft jaws won't be justifiable.
Lengths vary from 4" and go all the way upto 10".
Suggestions for OP 2 please ?