Acer 1020 hudraulic surface grinder crossfeef
Close
Login to Your Account
Likes Likes:  0
Results 1 to 4 of 4
  1. #1
    Join Date
    Jul 2019
    Country
    UNITED STATES
    State/Province
    Texas
    Posts
    2
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default Acer 1020 hudraulic surface grinder crossfeef

    I have an Acer 1020 ags hydraulic. The auto cross feed only works if I hold down the button on the control panel. I can put it in hand mode and move it back and forth. When put in auto it only moves the amount I set it to but like I said I have to hold fown the button to keep it going. Any insights or things to check would be greatly appreciated

  2. #2
    Join Date
    Jul 2005
    Location
    Cottage Grove, MN 55016
    Posts
    7,590
    Post Thanks / Like
    Likes (Given)
    4093
    Likes (Received)
    4537

    Default

    J&S Valve in Oklahoma bought a Kent Grinder also made in Taiwan and I was there and used the grinder and I could not get the cross feed to work, could get the table feed to work when I pressed the feed button. Then one of the machinists showed me I had to press the feed button 2 times to get the cross feed to work. Seemed weird but it worked. Give that a try.

  3. #3
    Join Date
    Jul 2019
    Country
    UNITED STATES
    State/Province
    Texas
    Posts
    2
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    Thanks will give that a try.

  4. #4
    Join Date
    Nov 2010
    Location
    netherlands
    Posts
    81
    Post Thanks / Like
    Likes (Given)
    2
    Likes (Received)
    25

    Default

    Hi,

    Think it could also be a faulty relay.

    If you have two of the same type in the machine try swapping them and see if the problem moves.

    Greetings Peter


    Verzonden vanaf mijn iPhone met Tapatalk


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •