malkey
Plastic
- Joined
- Apr 2, 2019
- Location
- Carrollton, Texas, USA
Having multiple issues with this machine, one of which is the crossfeed handle will move the head towards the operator but not the other direction.
There is an access panel on the front of the machine where the Y handle would be if it didn't have a driven head, the screw is moving fine.
It is moved too far forward to access the panel over the crossfeed nut.
The other issue I am having is the X traverse does not engage and I think the cause of that is the massive amount of oil leaking from the valve body.
Any ideas would be greatly appreciated.
There is an access panel on the front of the machine where the Y handle would be if it didn't have a driven head, the screw is moving fine.
It is moved too far forward to access the panel over the crossfeed nut.
The other issue I am having is the X traverse does not engage and I think the cause of that is the massive amount of oil leaking from the valve body.
Any ideas would be greatly appreciated.