Brake controlled truing device wheels
Close
Login to Your Account
Likes Likes:  0
Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2006
    Location
    greensboro,northcarolina
    Posts
    2,474
    Post Thanks / Like
    Likes (Given)
    163
    Likes (Received)
    631

    Default Brake controlled truing device wheels

    It's been a while since we have used this, and I have both CBN and diamond wheels I would like to get the taper out of and get the corners sharpened up. I read in an old post from Carbide Bob that he uses 72C80-J-VX for 120 - 240 grit for roughing and, CG180-K8-V for finishing sharp corners. What I didn't see is if this was for CBN or diamond? Are different wheels used for each?

  2. #2
    Join Date
    Jan 2007
    Location
    Flushing/Flint, Michigan
    Posts
    8,767
    Post Thanks / Like
    Likes (Given)
    469
    Likes (Received)
    7207

    Default

    Same dressing wheel (or stone to some) on both CBN and diamond wheels.
    What you are doing is cutting the bond away and the abrasive just falls out.
    Bob

  3. #3
    Join Date
    May 2008
    Location
    San Diego
    Posts
    349
    Post Thanks / Like
    Likes (Given)
    2
    Likes (Received)
    66

    Default

    To add to Bob's info, this from the Norton catalog.wheel.jpg

    Eugene


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •