10 fingers
Hot Rolled
- Joined
- Mar 9, 2003
- Location
- Vermont
I posted this appeal awhile back with no response. Hopefully, someone experienced with these grinders can lend advise.
Have partially rebuilt a 10 X 24 universal. Works very well with one exception, fine infeed. Fine infeed is selected by pulling on the infeed crank handle to engage the fine feed mechanism. However, when in the pulled position, no wheel travel occurs. Have disassembled the mechanism comparing to the parts manual. Everything is in place, in perfect condition. What am I missing?
Have partially rebuilt a 10 X 24 universal. Works very well with one exception, fine infeed. Fine infeed is selected by pulling on the infeed crank handle to engage the fine feed mechanism. However, when in the pulled position, no wheel travel occurs. Have disassembled the mechanism comparing to the parts manual. Everything is in place, in perfect condition. What am I missing?
