I am applying for a grinding position in which training will be provided, I currently have skills in manual milling and turning and setting and operating of CNC mill grinders. I have been given a pre interview question about the method of manufacture of a part which will determine whether I get an interview or not but I don't have much knowledge of CNC cylindrical grinding.
I have attached the drawing
The exact wording of what they asked me is as follows
"Further to your recent email for the grinding position, please can you complete the attached test piece before we progress any further. If you can please just jot a few notes down on how you would work/programme this piece. The material is tungsten carbide."
Can anyone tell me step by step how this would be produced on a CNC grinder.
Sent from my FIG-LX1 using Tapatalk
I have attached the drawing
The exact wording of what they asked me is as follows
"Further to your recent email for the grinding position, please can you complete the attached test piece before we progress any further. If you can please just jot a few notes down on how you would work/programme this piece. The material is tungsten carbide."
Can anyone tell me step by step how this would be produced on a CNC grinder.
Sent from my FIG-LX1 using Tapatalk