skipd1
Cast Iron
- Joined
- Jan 6, 2010
- Location
- Bismarck, ND
I just purchased a very used KO lee B860 tool and cutter grinder. I plan to completely disassemble it, clean it up and try to get it to work somewhat accurately. It only came with the grinding head and spindle with no additional pulleys and just the arbor that was mounted on the spindle. I would like to find a source of accessories for it that aren't totally over priced like on Ebay. I plan to start by going through the motor and checking out the spindle. The motor works but the bearings need to be replaced. The spindle seems okay and still shows somewhat clean oil in the sight glass, so that's hopeful. Everything moves with respect to the Table and the elevation of the motor head.
I will take some pictures and post them tomorrow. Any help and advise with respect to this project and acquiring some accessories would be extremely helpful.
Thanks
skipd1
I will take some pictures and post them tomorrow. Any help and advise with respect to this project and acquiring some accessories would be extremely helpful.
Thanks
skipd1