What's new
What's new

Jones & Shipman 540 Cross feed

DGComp

Plastic
Joined
Sep 22, 2020
Hi All,

I have just acquired a 540,
Nice used machine, all functions correctly, except the cross slide in 1 direction.
The table moves out fine, but when i turn the switch on the feed wheel, it doesn't seem to want to feed in.

Any ideas gratefully received before i start dismantling it :)
 
Hi

I have just taken a couple of pics.
The model is a 60090.
It is an early one with a mechanical crossfeed.


20200923_083614_resized.jpg20200923_083546_resized.jpg
 
You haven't tripped out the hydraulic shut off at the end of travel have you? There's a cam on the r/h side of the table that will activate the shut off lever
 








 
Back
Top