KO Lee B942 Sensitive work head
Close
Login to Your Account
Results 1 to 3 of 3
  1. #1
    Join Date
    Jan 2010
    Location
    Bismarck, ND
    Posts
    191
    Post Thanks / Like
    Likes (Given)
    15
    Likes (Received)
    5

    Default KO Lee B942 Sensitive work head

    Has any one taken apart a KO Lee B942 Sensitive work head. It came with a 5C collet holder and draw bar, or maybe that's the way it comes originally. Anyway I am wondering if the 5C collet holder can be removed from the work head, leaving the original B&S #11 Taper. Or are the inseparable and a unified part of the spindle. I was thinking of using a hydraulic press to push it out, but I would appreciate some advise as to how to proceed. I am hoping the B&S #11 with the 5C could be used in a motorized work head and switched between them? Or maybe this is a real dumb idea

    Skipd1

  2. #2
    Join Date
    Feb 2005
    Location
    Redding, CA
    Posts
    52
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    6

    Default

    I just put a small piece of round stock on the backside of the 5C adaptor and gave it a tap with a hammer and it popped out.

  3. Likes sfriedberg, skipd1 liked this post
  4. #3
    Join Date
    Jan 2010
    Location
    Bismarck, ND
    Posts
    191
    Post Thanks / Like
    Likes (Given)
    15
    Likes (Received)
    5

    Default

    Thanks, that's exactly what I ended up doing.

    skipd1


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •