Next weekend I'm going to take a look at a Boyar Schultz 2A618 grinder, and if it isn't completely worn out, I'll most likely purchase it. It is the same as the one on this site, although much, much dirtier - 6" X 18" Boyar-Schultz 2A618, Hydraulic Surface Grinder, 1 Hp, Coolant, Auto Lube, 71360 Grinders, Surface Reciprocating Table (Horizontal Spindle) - SurplusRecord.com
The info I'd like to know prior to going down, is how to pick one of these up with a forklift. Are there bolt holes I can screw in a lug or bolt a chain? If so, any idea on the bolt size? I couldn't find a manual either, so if anyone can shed any light on this, I'd be very appreciative.
And one more thing, if anyone cares to weigh in on anything specific with this model I should be watching out for, that would be great.
Many thanks in advance.
Brandon
The info I'd like to know prior to going down, is how to pick one of these up with a forklift. Are there bolt holes I can screw in a lug or bolt a chain? If so, any idea on the bolt size? I couldn't find a manual either, so if anyone can shed any light on this, I'd be very appreciative.
And one more thing, if anyone cares to weigh in on anything specific with this model I should be watching out for, that would be great.
Many thanks in advance.
Brandon