Jersey John
Stainless
- Joined
- May 29, 2015
- Location
- Beccles / Suffolk, United Kingdom
Hi folk ... Just got a Jones & Shipman 540 Surface Grinder and have a few basic questions:
Firstly: Serial numbers, there seems to be two, one is stamped in the Lefthand End of the table (1839/74) but where is the second one please (71074)?? and is 71xxx the year.
Also I want to remove the main outer ring of the Cross feed handle, it seems to be held by three Cap Heads but doesn't want to move ... ??? Is there something else I should be doing??
Finally, the hydraulic oil is pretty dirty IMO ... how often would you replace the filter in the oil tank??
Many thanks
John
Firstly: Serial numbers, there seems to be two, one is stamped in the Lefthand End of the table (1839/74) but where is the second one please (71074)?? and is 71xxx the year.
Also I want to remove the main outer ring of the Cross feed handle, it seems to be held by three Cap Heads but doesn't want to move ... ??? Is there something else I should be doing??
Finally, the hydraulic oil is pretty dirty IMO ... how often would you replace the filter in the oil tank??
Many thanks
John