dana gear
Hot Rolled
- Joined
- Feb 27, 2013
- Location
- Northern califorina, usa
My good buddy dropped this off at my home shop yesterday, he purchased it up in Washington state about 25 years ago and it has basically been in storage ever since. There appears to be no model number anywhere. There is a serial number stamped on the base 5943 as well as what I believe to be a date beneath that of 1944. Searching grinders on line it kind of appears to be a Norton model 1, tool and cutter grinder but that's a guess.
I did look in Vintage Machinery's site but found nothing close.
It came with about 150 pounds of mostly unused Norton wheels, and 5 boxes of tooling, several hundred pounds in all.
We have surface grinders here, however there's tooling in there that I simply have no idea what it was used for.
A lot of the tooling for the machine is still the original factory green paint and has Norton casted/stamped into it.
Any ideas on model? Source for manuals?
I did look in Vintage Machinery's site but found nothing close.
It came with about 150 pounds of mostly unused Norton wheels, and 5 boxes of tooling, several hundred pounds in all.
We have surface grinders here, however there's tooling in there that I simply have no idea what it was used for.
A lot of the tooling for the machine is still the original factory green paint and has Norton casted/stamped into it.
Any ideas on model? Source for manuals?