eKretz
Diamond; Mod Squad
- Joined
- Mar 27, 2005
- Location
- Northwest Indiana, USA
Just picked up an 818 MicroMaster with the Dial-a-Size option, and thought I had all the manuals. Apparently I have 2 parts manuals and 2 operation/repair manuals for the Dial-a-Size equipment but nothing for the basic grinder operation and maintenance. Anyone got a pdf copy?
Also need to switch this machine over from 480 to 240/208 so if anyone has been through that with one of these grinders, pointers would be appreciated. It will be running off of a 25HP VFD from single phase. I know I need to swap motor wiring and change heaters. Haven't looked yet to see if there are taps on the transformer for the lower voltage stuff or what.
Also need to switch this machine over from 480 to 240/208 so if anyone has been through that with one of these grinders, pointers would be appreciated. It will be running off of a 25HP VFD from single phase. I know I need to swap motor wiring and change heaters. Haven't looked yet to see if there are taps on the transformer for the lower voltage stuff or what.