binnaway
Plastic
- Joined
- Nov 29, 2013
- Location
- Australia, New South wales
Does anyone have a lead to the bearings in the table feed that support the 2 gears. They appear to be 3/8" ID x 7/8" OD x1/2" long.
There are 5 all up, 4 for the gear mechanism and one that is fitted to the end of the operating shaft as a support.
Many Thanks
Garry
There are 5 all up, 4 for the gear mechanism and one that is fitted to the end of the operating shaft as a support.
Many Thanks
Garry