Anyone have a QIDI TECH X-Plus 3D Printer
Close
Login to Your Account
Likes Likes:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Dec 2017
    Country
    UNITED STATES
    State/Province
    New York
    Posts
    195
    Post Thanks / Like
    Likes (Given)
    38
    Likes (Received)
    76

    Default Anyone have a QIDI TECH X-Plus 3D Printer

    Looking at one of these and wondered if anyone has any experience with this unit.

    https://www.amazon.com/dp/B07JCKNQSZ...v_ov_lig_dp_it

    Opinions?

    Thanks,
    Ted

  2. #2
    Join Date
    Mar 2008
    Location
    vacaville ca
    Posts
    552
    Post Thanks / Like
    Likes (Given)
    87
    Likes (Received)
    150

    Default

    yes, when it works it seems to work great but I have issues with the nozzles plugging up. printed all week no issues, finished one print, printer sat for a few hours started the next job and it was plugged (not the first time). took the print head apart cleared the clog now the print head wont heat over 175c. plugged in another extruder and same issue. both heads had 14ohm resistance and 23v feeding. emailed tech support and they wanted a video, really don't know what a video will prove that after 10minutes the temp only hit 175. Not sure where the failure but it seems parts are available. they have a ebay/amazon/ali stores.

  3. #3
    Join Date
    Jun 2020
    Country
    UNITED STATES
    State/Province
    Ohio
    Posts
    64
    Post Thanks / Like
    Likes (Given)
    5
    Likes (Received)
    22

    Default

    I have the X-MAX and have had no issues. It's dead simple to use and produces good prints right out of the box.

  4. #4
    Join Date
    Mar 2021
    Country
    UNITED STATES
    State/Province
    Texas
    Posts
    34
    Post Thanks / Like
    Likes (Given)
    9
    Likes (Received)
    8

    Default

    I have two X-Plus machines I have run about 50 kilos of filament through and they work just fine. It was recommended to me by a friend that uses several Qidis for production work.

    Facebook has a good Qidi user's group.

  5. #5
    Join Date
    Apr 2021
    Country
    UKRAINE
    Posts
    1
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    Pros of this printer: large print area, fully enclosed body, 2 spool mounting options, 2 network interfaces, built-in backlight, ability to turn off the printer after printing, magnetic table with good adhesion and easy part separation.
    Cons: High price
    What do I lack in this printer to call it perfect, in terms of usability? It needs a quieter driver and a double-sided part blowout.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •