Total un-initiated Additive guy here.
What would be the draw back/s of printing a heavy duty Gasoline container? IE; 3/16-1/4" wall thickness, odd shapes, 1 US Gallon capacity. I would guess a 18"x18" Bed/Platform would be enough to contain X and Y and another 18" for Z would clear the part I'm thinking of. A 2.5" diameter Threaded fill hole on top, and a smaller dispensing hole in the bottom. (some of the motorbike guys are following now )
HDPE is printable with a high Temp. Machine. With that type of wall thickness(.25"), would it need to be layered, or one shot and done? Like I said, I know nothing.
I can create my own Solid model obviously.
Robert
What would be the draw back/s of printing a heavy duty Gasoline container? IE; 3/16-1/4" wall thickness, odd shapes, 1 US Gallon capacity. I would guess a 18"x18" Bed/Platform would be enough to contain X and Y and another 18" for Z would clear the part I'm thinking of. A 2.5" diameter Threaded fill hole on top, and a smaller dispensing hole in the bottom. (some of the motorbike guys are following now )
HDPE is printable with a high Temp. Machine. With that type of wall thickness(.25"), would it need to be layered, or one shot and done? Like I said, I know nothing.
I can create my own Solid model obviously.
Robert