bluearc
Aluminum
- Joined
- Sep 21, 2012
- Location
- pennsylvania
The distance between the spindle and the bed is 7" and with the present end mill holder it drops down to 4 7/8" and with the mill another 2" which leaves about 2 7/8" clearance to work on something. This is not enough even for a small vise so it is a lot of time spent clamping work.
My question is, are there other means of holding end mill cutters higher up inside the mt.
thanks
My question is, are there other means of holding end mill cutters higher up inside the mt.
thanks