StrayAlien
Cast Iron
- Joined
- Aug 18, 2014
- Location
- Melbourne, Australia
Hi all,
I've seen reference here and there to the fine feed attachment for the B/S #2 surface grinder.
From lathes.co.uk:
"As an option the makers offered a special fine-feed attachment that allowed the vertical adjustment to be set to just 0.0001" (1/10 of one-thousand of an inch) together with a plunger-type positive stop that could be withdrawn to allow free turning of the wheel"
I am curious. Anybody ever seen one of these things or have (or can take) a pic or three?
Greg.
I've seen reference here and there to the fine feed attachment for the B/S #2 surface grinder.
From lathes.co.uk:
"As an option the makers offered a special fine-feed attachment that allowed the vertical adjustment to be set to just 0.0001" (1/10 of one-thousand of an inch) together with a plunger-type positive stop that could be withdrawn to allow free turning of the wheel"
I am curious. Anybody ever seen one of these things or have (or can take) a pic or three?
Greg.