projectnut
Stainless
- Joined
- Mar 4, 2006
- Location
- Wisconsin
I am in the process of purchasing a Sheldon MW-56-P lathe. It was originally outfitted with a Furnas brand reversing starter. The original starter is marginal and I would like to replace it. I have several other machines in the shop that utilize Allen Bradley controls and have been quite happy with them. It has been suggested I use either a size 0 or size 1 model 705 or 505. The problem I've run into is that I can't seem to find any literature to identify the various suffixes attached to the starter identification numbers.
I have found several new and used 705 and 505 series starters, but they have a variety of suffix letters attached. Here are a few examples: 505-BOA, 705-BOD46, 705X-AOA, 705-AAA, 705-AOD, etc., etc.
Can anyone point me in the proper direction as to where to find the information needed to decipher what the suffix letters and numbers mean?
I have found several new and used 705 and 505 series starters, but they have a variety of suffix letters attached. Here are a few examples: 505-BOA, 705-BOD46, 705X-AOA, 705-AAA, 705-AOD, etc., etc.
Can anyone point me in the proper direction as to where to find the information needed to decipher what the suffix letters and numbers mean?