raven007
Aluminum
- Joined
- Dec 7, 2010
- Location
- georgia, usa
Today I dragged a tiebar, cone head Hendey home. Its in pretty rough shape, but the price was fair for me. Serial #7442, has a 9 speed uni-drive mounted. Does not have "Hendey" on the tie bar, nor does it have the size cast into the side of the bed. Its spent awhile outside, everything is stuck. So far with a lot of oil, a bit of rubber mallet and patience, things are starting to move. I will grab some pics shortly. Paging hendeyman for more info.
Update: braved the cold of GA (northerners are eyerolling hard...) and measures through hole, and distance between center. 15/16" through hole, a little over 36 inches from the face of the spindle to the face of the tailstock ram with the tailstock flush with the end of the bed. So I am guessing its a 12x6. I have had all the usual pdfs of Hendey stuff downloaded for forever, since I have wanted one for awhile.
The only thing missing is the compound gear and the stud gear.
Update: braved the cold of GA (northerners are eyerolling hard...) and measures through hole, and distance between center. 15/16" through hole, a little over 36 inches from the face of the spindle to the face of the tailstock ram with the tailstock flush with the end of the bed. So I am guessing its a 12x6. I have had all the usual pdfs of Hendey stuff downloaded for forever, since I have wanted one for awhile.
The only thing missing is the compound gear and the stud gear.