Ed Hobbs
Cast Iron
- Joined
- Jan 25, 2006
- Location
- Raleigh, NC
Looking for an original headstock pulley, wood tool post and tool rest and the slide rest for metal cutting.
Am restoring a 125 on the original treadle stand. (both models interchange)
Have patterns for the pedal and the two linkages from the pedal to the flywheel so can make at least the headstock pulley pattern as well as the tool posts and holder for wood patterns if I can't find an original.
Very cute little foot powered lathe when complete.
Thanks Ed
Am restoring a 125 on the original treadle stand. (both models interchange)
Have patterns for the pedal and the two linkages from the pedal to the flywheel so can make at least the headstock pulley pattern as well as the tool posts and holder for wood patterns if I can't find an original.
Very cute little foot powered lathe when complete.
Thanks Ed