rivett608
Diamond
- Joined
- Oct 25, 2002
- Location
- Kansas City, Mo.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
Machining a graduated dividing disc for the rose engine
- Thread starter rivett608
- Start date
- Replies 5
- Views 1,288
Limy Sami
Diamond
- Joined
- Jan 7, 2007
- Location
- Norfolk, UK
YIKES 
and well done rivett ....having marked several plates and tables in 360 deg (1,s 5's & 10's) ..........and drilled my own plates for dividing heads I've a fair idea of what that's like.
and well done rivett ....having marked several plates and tables in 360 deg (1,s 5's & 10's) ..........and drilled my own plates for dividing heads I've a fair idea of what that's like.
old-biker-uk
Cast Iron
- Joined
- Jan 17, 2001
- Location
- Somerset, England
'Proper job' as we say here in the West Country.
Like Limy Sami, I drilled all the plates (GHT dividing device) locked myself in the workshop so there were no interruptions).
Didn't do that on the 360 ring for an Ellipsograph and ended up with 6-4 instead of 5-5 on the last 10 degrees
Bill - well impressed with the low amplitude rosettes.
Mark
Like Limy Sami, I drilled all the plates (GHT dividing device) locked myself in the workshop so there were no interruptions).
Didn't do that on the 360 ring for an Ellipsograph and ended up with 6-4 instead of 5-5 on the last 10 degrees
Bill - well impressed with the low amplitude rosettes.
Mark
rivett608
Diamond
- Joined
- Oct 25, 2002
- Location
- Kansas City, Mo.
Yes concentration is a must. Here is the funny part, I got 180 degrees done and then it was 5:30 when we had a friend over for happy hour. I had about 4 large Canadian Whiskeys (Crown Royal) On the rocks. Btw, I pour large, strong drinks around here. After some very nice cheese, smoked salmon, olives, etc. I headed back to the shop with another drink and a dish of chocolates about 10:30. Was finished before midnight. That is often how I do my best work.
Now setting up to drill A couple rows of holes in the edge.
Now setting up to drill A couple rows of holes in the edge.
rivett608
Diamond
- Joined
- Oct 25, 2002
- Location
- Kansas City, Mo.
rivett608
Diamond
- Joined
- Oct 25, 2002
- Location
- Kansas City, Mo.
