Joe in NH
Diamond
- Joined
- Jul 28, 2007
- Location
- Stratham, Cow Hampshire
Metal Lathe Belt Driven - Miscellaneous Tools - West Sand Lake, New York | Facebook Marketplace
Nice indoor condition. Might be missing tailstock. 7 foot bed x probably 18 swing (i.e. perhaps 40" between centers.)
Appears to be a basement location shared with other heavy machinery - access may be possible - he has removable rubber mats so it is a "shop of use."
Rise & fall on a "captive" raising screw with cross dovetail. "Early" although not earliest chuck.
This and a pair of calipers (and a drive) can put you into 19th Century machine work.
Without the tailstock it is pretty much scrap.
Joe in NH
Nice indoor condition. Might be missing tailstock. 7 foot bed x probably 18 swing (i.e. perhaps 40" between centers.)
Appears to be a basement location shared with other heavy machinery - access may be possible - he has removable rubber mats so it is a "shop of use."
Rise & fall on a "captive" raising screw with cross dovetail. "Early" although not earliest chuck.
This and a pair of calipers (and a drive) can put you into 19th Century machine work.
Without the tailstock it is pretty much scrap.
Joe in NH