Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
unknown milling machine
- Thread starter fthi
- Start date
- Replies 4
- Views 1,661
RCPDesigns
Hot Rolled
- Joined
- Sep 3, 2014
- Location
- Atlanta GA.
That would be a nice milling machine and if it is currently in your shop, I wouldn't let it leave. 
Looks like the vertical head can come off, I wonder if it has a horizontal spindle underneath.
Hello
I ask for your help to identify this milling machine
no mark on the machine
can you help me solve the mystery
thank you in advance
View attachment 290385
View attachment 290386
View attachment 290387
sfriedberg
Diamond
- Joined
- Oct 14, 2010
- Location
- Oregon, USA
Yeah, that head is similar in overall configuration to the vertical head for the Nichols mill, which is fundamentally a horizontal mill. At some point, you might unbolt it to see if you have a large taper in the spindle. From the vintage, it's more likely to be a large B&S taper than an NMTB taper.
Froneck
Titanium
- Joined
- Dec 4, 2010
- Location
- McClure, PA 17059
I not sure that's a Horizontal Mill because I don't see any provisions for an Overarm. I could be wrong because the photos are small though the drive spindle seems kinda high to allow for an overarm.