Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
Weaver press
- Thread starter ldj
- Start date
- Replies 4
- Views 990
enginebill
Stainless
- Joined
- Feb 17, 2005
- Location
- Plymouth Meeting PA
The hi speed press on my 28 ton unit is rated for 2 tons.
Thanks for that info.
My high pressure arm is missing. I am in the process of fabbing one up. In mean time I have used a old bumper jack handle as a lever with it using the wheel spokes. I know I am not getting real high pressure but I'm pretty sure I'm getting more than arbor press function. I'm afraid to push any harder afraid I'll brake the casting I'm pushing against, see photos
My high pressure arm is missing. I am in the process of fabbing one up. In mean time I have used a old bumper jack handle as a lever with it using the wheel spokes. I know I am not getting real high pressure but I'm pretty sure I'm getting more than arbor press function. I'm afraid to push any harder afraid I'll brake the casting I'm pushing against, see photos
wrenchguy
Plastic
- Joined
- Dec 5, 2011
- Location
- NW Indiana
This video may help with your fabrication. Don't overload your press, that'a why your drive link is broke and missing. You can see in the video mine was overloaded at some point and repaired.
https://youtu.be/hzsJilyyNBk
https://youtu.be/hzsJilyyNBk
