Doug W
Hot Rolled
- Joined
- Sep 22, 2003
- Location
- Pacific NW
Hi All
I have gone through my J head that I recently aquired and luckly didn't find much wear or damage. But I have some questions.
1. Should some type of grease be applied between the clutch teeth on the Splined Hub? If so what?
2. What is the proper proceedure for adusting the overload clutch?
thanks in advance
Doug W
I have gone through my J head that I recently aquired and luckly didn't find much wear or damage. But I have some questions.
1. Should some type of grease be applied between the clutch teeth on the Splined Hub? If so what?
2. What is the proper proceedure for adusting the overload clutch?
thanks in advance
Doug W
