Cyclotronguy
Stainless
- Joined
- Sep 21, 2005
- Location
- Northern California
The #3 electrocycle is up and running. To all the folks who may have had a part in this machine..... THANK YOU!
Problem was operator headspacing and timing issues. I didn't know that the speed selector had to be in the off position in order to get the main contactor to close.
Took several hours with a meter, pencil and paper to figure that one out. Damn all those red wires!
Cyclotronguy
Problem was operator headspacing and timing issues. I didn't know that the speed selector had to be in the off position in order to get the main contactor to close.
Took several hours with a meter, pencil and paper to figure that one out. Damn all those red wires!
Cyclotronguy