lucky13dave
Aluminum
- Joined
- Jul 21, 2007
- Location
- Boston, MA; USofA
Hi everyone, I've been reading on this forum for a while now. I've relocated to Boston from Long Island, and am seeking employment.
I have three and a half years experience on CNC milling machines and Machine centers. This work was at two shops on Long Island.
At the first shop, I started with little experience and progressed rapidly to setting up jobs. I also received introductory training in program editing. This was a small shop with 4 Mazak VMCs and one HMC.
At the second shop, a much larger shop, with 19 Cincinnati gantry machines, 5 bridge mills, a 5 axis multi pallet cell, and other equipment, I was setting up and operating jobs on the gantry and bridgemills. These machines had 3 or 4 spindles, and some had partial 5 axis.
I also have an academic background in engineering, which included studies in mechanical engineering.
If anybody needs a setup/operator in the area, or has any leads feel free to send a message. Thanks, and any advice would be appreciated.
I have three and a half years experience on CNC milling machines and Machine centers. This work was at two shops on Long Island.
At the first shop, I started with little experience and progressed rapidly to setting up jobs. I also received introductory training in program editing. This was a small shop with 4 Mazak VMCs and one HMC.
At the second shop, a much larger shop, with 19 Cincinnati gantry machines, 5 bridge mills, a 5 axis multi pallet cell, and other equipment, I was setting up and operating jobs on the gantry and bridgemills. These machines had 3 or 4 spindles, and some had partial 5 axis.
I also have an academic background in engineering, which included studies in mechanical engineering.
If anybody needs a setup/operator in the area, or has any leads feel free to send a message. Thanks, and any advice would be appreciated.