garrettdave
Plastic
- Joined
- Feb 17, 2009
- Location
- Arizona, USA
I had been looking for a mill vise and this popped up on a local CL and picked it up Tuesday. Pretty gummy, you could not even turn the screw.
I soaked everything in thinner, removed all the grime and rust and primed and painted. Looking to see if I can get an idea of the age, if anybody has ideas...let me know. I still need to install some jaws, but should be pretty straightforward.
This has a 5/8" square drive (a little web searching keeps on pointing me to hex) so if anyone has an old or extra handle that would work, drop me a line.
Thanks,
Dave
Small images, click if you want bigger
Before,
After
I soaked everything in thinner, removed all the grime and rust and primed and painted. Looking to see if I can get an idea of the age, if anybody has ideas...let me know. I still need to install some jaws, but should be pretty straightforward.
This has a 5/8" square drive (a little web searching keeps on pointing me to hex) so if anyone has an old or extra handle that would work, drop me a line.
Thanks,
Dave
Small images, click if you want bigger
Before,
After