70chall440
Aluminum
- Joined
- Jul 15, 2019
The 6F power feed on my Series 1 BP wasn't working when I got it, I disassembled it and discovered that the circuit board has some issues. As can be seen in the pictures, there are at least 2 resistors burned out. I have done a far amount of research and understand that new boards can be obtained, however many say "upgraded" but offer little information what this means. Given that they all seem to run $220 to $290, I believe the are essentially the same, but I could be wrong.
My questions are;
1. Is there one specific "upgrade" related to these boards or is this some generic term that is related to better components or something?
2. Is it better to replace the board to attempt to have it rebuilt?
3. I see that there are various models of the 6F, how do you determine which model I have?
Appreciate any information
My questions are;
1. Is there one specific "upgrade" related to these boards or is this some generic term that is related to better components or something?
2. Is it better to replace the board to attempt to have it rebuilt?
3. I see that there are various models of the 6F, how do you determine which model I have?
Appreciate any information