What's new
What's new

EZ Path 2 encoder

Greg L.

Plastic
Joined
Sep 27, 2007
Location
kansas, usa
How does one test an encoder? The Z axis manual control no longer works. The Z axis itself works both jogging and feeding, just using the manual wheel does not work. I looked at the encoder and the wire cable is integrated with the encoder for I was hoping maybe a wire was broken. Any help? Thanks.
 
I'd look at your handwheel and related wiring. If you can jog and feed the Z, the encoder is fine. You test encoders with a scope
 
The electrician found a connector for it when he was going to fish the cable out. The connector was unscrewed and apart. The connector for the X axis was almost the same. So that problem is solved.
 








 
Back
Top