spontarelliam
Plastic
- Joined
- Jul 28, 2018
Ever since I've had this lathe, the carriage lock hasn't worked. I finally decided to attempt a repair, following along the maintenance manual, starting at page 1-10 (Carriage lock). I've got the apron cover off, but now I'm stuck on step 17. I don't see any two piece lock bolt. I'm not sure how it could be completely missing, but maybe that explains why the thing doesn't work. I'm having a hard time seeing from Figure 1.27 what this lock bolt is supposed to look like and where exactly it's supposed to go, and how it affects the carriage lock lever.
Here's a photo of where I'm at. I'd appreciate any guidance on how to move forward and where I can find a replacement two piece lock bolt. I'd also appreciate if you could point in this picture to where the lock bolt is supposed to be.
Thanks!
Here's a photo of where I'm at. I'd appreciate any guidance on how to move forward and where I can find a replacement two piece lock bolt. I'd also appreciate if you could point in this picture to where the lock bolt is supposed to be.
Thanks!