Jonathan Smith
Plastic
- Joined
- Jan 29, 2021
Does anyone have sketches, drawings or dimensions on the nut, bushing and bolt that hold change gears to the banjo slot. This would be the standard banjo that works with the english thread sets.
There are actually 2 steps in the slot. The nut slot is about .785" wide so the nut is probably .750" dia. The opening on the front is about .394" wide so the bolt shank is probably .500" and the threaded end is probably 3/8". The intermediate slot is about .495" wide. What is this for? Does the nut have milled shoulders that fit here to keep it from spinning.
Pictures, sketches, dimensions for these 3 parts would be greatly appreciated.
There are actually 2 steps in the slot. The nut slot is about .785" wide so the nut is probably .750" dia. The opening on the front is about .394" wide so the bolt shank is probably .500" and the threaded end is probably 3/8". The intermediate slot is about .495" wide. What is this for? Does the nut have milled shoulders that fit here to keep it from spinning.
Pictures, sketches, dimensions for these 3 parts would be greatly appreciated.