ThePrecisionist
Aluminum
- Joined
- Nov 24, 2014
Had the T42 running a simple tubing job.
Part has 1/8" cross hole.
Machine made 100 Pcs. using proven program.
Live cross drill was programed at B0 & B180.
So the mechanical lock was firing and locking.
(this machine only can lock at 2.5 Deg.)
Now it refuses to lock and getting a 2029 alarm.
Have gotten around it for now by programing B6.0 & B186.0
The spindle brake will hold if not divisible by 2.5.
Plenty strong for this job.
Seems it might be a proximity switch gone semi-bad?
Anyone experienced this before?
Thanks!
Part has 1/8" cross hole.
Machine made 100 Pcs. using proven program.
Live cross drill was programed at B0 & B180.
So the mechanical lock was firing and locking.
(this machine only can lock at 2.5 Deg.)
Now it refuses to lock and getting a 2029 alarm.
Have gotten around it for now by programing B6.0 & B186.0
The spindle brake will hold if not divisible by 2.5.
Plenty strong for this job.
Seems it might be a proximity switch gone semi-bad?
Anyone experienced this before?
Thanks!