Hello,
for our old MAHO 400C with a Phillips 432/9 NC I would ask you if there is a possibility to work with larger NC-files.
The control has no obvious menu item for the DNC (Drip Feed) configuration except the baud rate (2400) (N116/N117).
I'm not familiar with the 432 controls yet.
Currently I am still evaluating a suitable DNC software.
Thank you for your help
Frank
for our old MAHO 400C with a Phillips 432/9 NC I would ask you if there is a possibility to work with larger NC-files.
The control has no obvious menu item for the DNC (Drip Feed) configuration except the baud rate (2400) (N116/N117).
I'm not familiar with the 432 controls yet.
Currently I am still evaluating a suitable DNC software.
Thank you for your help
Frank
Last edited: