I had a message asking me for some help from someone in the Haas group using Fusion on a UMC. He sent me a sample of the code and right off the bat there's issues with the post or settings, Im guessing both. I only tinkered with Fusion when it first came out then dumped it so I have no clue how to get this kid up and going with post mods.
For some reason its throwing out a G53 after the G54 call (Damn that could get ugly. Then in the middle of the feeding it swaps plains (G18 to G17 , That could get real ugly).
Its apparent that the kid cant read code and apparently he don't want to tell his employer so i'm trying to help him out a little before he crashes someone else's machine.
If someone on here has a post they are using or knows to be good for a UMC I would appreciate a copy.
[email protected]
For some reason its throwing out a G53 after the G54 call (Damn that could get ugly. Then in the middle of the feeding it swaps plains (G18 to G17 , That could get real ugly).
Its apparent that the kid cant read code and apparently he don't want to tell his employer so i'm trying to help him out a little before he crashes someone else's machine.
If someone on here has a post they are using or knows to be good for a UMC I would appreciate a copy.
[email protected]