Colin Heath
Aluminum
- Joined
- Mar 11, 2017
Hello All,
I know this control is old but hoping somebody can help please. I have finally got my bridgeport interact 1 connected to PC and using Fusion 360 fro CAD/CAM and using their TNC155 post processor.
I have had some programmes running drip feed but tried to run one today and it keeps stopping on the fault I have shown in picture
All the tool definitions are in the lines above this in the correct place which makes me wonder if it looks elsewhere for tool definitions when drip feeding?
It states in manual that it looks for tool offsets in the tool library during drip feed blockwise transfer.
I cannot for the life of me find the library in the control. I tried calling tool 0 in programming mode but it lets me call tool and thats it.
It seems some tools work and some don't so I'm wondering if definitions are stored for other tools somewhere in my memory ad its using those.
EDIT: I have read that during drip feed the 151 controller doesn't remember the tool definitions so it works if one line of tool refs but not multiple lines. Anyone know if this is the case please?
Many thanks
Colin
I know this control is old but hoping somebody can help please. I have finally got my bridgeport interact 1 connected to PC and using Fusion 360 fro CAD/CAM and using their TNC155 post processor.
I have had some programmes running drip feed but tried to run one today and it keeps stopping on the fault I have shown in picture
All the tool definitions are in the lines above this in the correct place which makes me wonder if it looks elsewhere for tool definitions when drip feeding?
It states in manual that it looks for tool offsets in the tool library during drip feed blockwise transfer.
I cannot for the life of me find the library in the control. I tried calling tool 0 in programming mode but it lets me call tool and thats it.
It seems some tools work and some don't so I'm wondering if definitions are stored for other tools somewhere in my memory ad its using those.
EDIT: I have read that during drip feed the 151 controller doesn't remember the tool definitions so it works if one line of tool refs but not multiple lines. Anyone know if this is the case please?
Many thanks
Colin