RforEDM
Plastic
- Joined
- Jun 19, 2014
- Location
- Michigan, USA
The software sat idle for a few years after our lathe hand moved on and we haven’t been able to find a replacement. So now I’ve been slowly going through everything and getting our Haas st25 going again. Before I updated it would post my finish passes with a g70 and just call the roughing canned cycle N numbers. Now when ever I try to post anything with a basic finish selected it leaves whatever stock was left in the roughing cycle and posts in separate lines no longer using the g70. I have double and triple checked every step and the post nothing has changed except me updating. Any help figuring this out would be greatly appreciated.
