Updated to the newest V30 build of Bobcad and now my finish passes are posting wrong
Close
Login to Your Account
Likes Likes:  0
Results 1 to 1 of 1
  1. #1
    Join Date
    Jun 2014
    Location
    Michigan, USA
    Posts
    13
    Post Thanks / Like
    Likes (Given)
    10
    Likes (Received)
    4

    Default Updated to the newest V30 build of Bobcad and now my finish passes are posting wrong

    The software sat idle for a few years after our lathe hand moved on and we havenít been able to find a replacement. So now Iíve been slowly going through everything and getting our Haas st25 going again. Before I updated it would post my finish passes with a g70 and just call the roughing canned cycle N numbers. Now when ever I try to post anything with a basic finish selected it leaves whatever stock was left in the roughing cycle and posts in separate lines no longer using the g70. I have double and triple checked every step and the post nothing has changed except me updating. Any help figuring this out would be greatly appreciated.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •