BluishInventor
Aluminum
- Joined
- Jul 7, 2020
Hi everyone,
I'm currently evaluating different CAM systems to potentially replace our current one, CamWorks. I've checked out Mastercam, Edgecam, a little bit of Hypermill, NX, and Esprit.
Without really getting into my needs, I want to hear about what CAM system you have and the things you like/dislike and any other system you feel is better than the other. This could be inefficient workflows to bugs to lack of features etc.. Also, if you can briefly mention what type of work you typically do with your CAM system, it would be greatly appreciated.
I would also hope to see differing opinions, without too much arguing
I'm currently evaluating different CAM systems to potentially replace our current one, CamWorks. I've checked out Mastercam, Edgecam, a little bit of Hypermill, NX, and Esprit.
Without really getting into my needs, I want to hear about what CAM system you have and the things you like/dislike and any other system you feel is better than the other. This could be inefficient workflows to bugs to lack of features etc.. Also, if you can briefly mention what type of work you typically do with your CAM system, it would be greatly appreciated.
I would also hope to see differing opinions, without too much arguing