Machinist I, II, & III Positions @Benchmark Electronics Concord, CA
Close
Login to Your Account
Results 1 to 7 of 7
  1. #1
    Join Date
    Apr 2021
    Country
    UNITED STATES
    State/Province
    California
    Posts
    1
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Exclamation Machinist I, II, & III Positions @Benchmark Electronics Concord, CA

    PRINCIPAL RESPONSIBILITIES

    • Sets up and operate lathes, millers, shapers, grinders, planers and power drills. Works from blueprints, sketches and verbal instructions.
    • Performs highly diversified machining operations such as boring, turning, facing, reaming, grinding, milling and tapering.
    • Performs work on machined parts, forgings and casting which are of varying degrees of complexity in mature and critically dimensioned.
    • Determines and maintains the proper operational sequences at all times, makes all necessary mathematical calculations to complete the job.
    • Determines the appropriate feeds and speeds for all operations.
    • Performs simple welding, brazing, silver soldering and heat treating.
    • Checks own work. Usually works to tolerance of +/-.00005.
    • Reads and interprets complex blueprints and manufactures parts from a layout drawing without use of sketches or verbal instructions making all necessary mathematical calculations to complete the job according to the drawing.
    • Bench work includes any necessary operations such as filing, de-burring, grinding, lapping, indexing, scraping, and fitting in order to complete mechanical assemblies from crude sketches, verbal instructions, or work samples.

    Benefits:
    • Competitive Salary range
    • Health
    • Dental
    • Vision
    • 401k 4% match plan
    • 2 weeks paid vacation
    • Paid sick leave
    • Production Bonus%
    • $1500 sign on bonus

    If you are interested you can reach me at my email at:[email protected]

  2. #2
    Join Date
    Apr 2018
    Country
    UNITED STATES MINOR OUTLYING ISLANDS
    Posts
    8,198
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    4003

    Default

    Quote Originally Posted by Benchmark Jobs View Post
    PRINCIPAL RESPONSIBILITIES

    Set up and operate lathes, millers, shapers, grinders, planers and power drills. Works from blueprints, sketches and verbal instructions.
    Umm .... what can I say ?

  3. Likes triumph406 liked this post
  4. #3
    Join Date
    May 2011
    Country
    UNITED STATES
    State/Province
    New Jersey
    Posts
    2,999
    Post Thanks / Like
    Likes (Given)
    301
    Likes (Received)
    1652

    Default

    Quote Originally Posted by EmanuelGoldstein View Post
    Umm .... what can I say ?
    .00005 tolerance...on a shaper...in what world does that happen?

  5. #4
    Join Date
    Jul 2007
    Location
    Missoula Mt
    Posts
    1,397
    Post Thanks / Like
    Likes (Given)
    62
    Likes (Received)
    674

    Default

    And right on spec +-.00005 Lots of luck with that...Phil

  6. #5
    Join Date
    Jul 2006
    Location
    Hillsboro, New Hampshire
    Posts
    13,595
    Post Thanks / Like
    Likes (Given)
    2993
    Likes (Received)
    9117

    Default

    Quote Originally Posted by Phil in Montana View Post
    And right on spec +-.00005 Lots of luck with that...Phil
    Must be a bunch of hacks here. Whenever I bandsaw something, I'm hitting half a tenth just from following my Sharpie layout.

    I can hit nanometers using my HF lathe, and heck, the Haas is good for splitting atoms (but don't tell the DOE or NNSA).

  7. Likes charlie gary liked this post
  8. #6
    Join Date
    Apr 2018
    Country
    UNITED STATES MINOR OUTLYING ISLANDS
    Posts
    8,198
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    4003

    Default

    Quote Originally Posted by plastikdreams View Post
    .00005 tolerance...on a shaper...in what world does that happen?
    What kinda hack are you ? Everyone knows that when you need to hold fifty millionths, you put it on the planer

  9. #7
    Join Date
    Jul 2007
    Location
    Missoula Mt
    Posts
    1,397
    Post Thanks / Like
    Likes (Given)
    62
    Likes (Received)
    674

    Default

    Hll I do it with a file...Phil


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •