What's new
What's new

1943 no3 Cincinnati horizontal

pressbrake1

Stainless
Joined
Dec 8, 2012
Location
essex england
Hello has any the dimensions for the drive gear that goes in the horizontal spindle for the vertical head for a 1943 no3 Cincinnati horizontal
Thanks
 
Very particular. Brochure has interesting statements - if one happens to have this head (K&T had NUMEROUS vertical heads)

Its HELICAL, meaning it is made for the mating gear housed in the head

The V Head has the same speeds as the machine - meaning the head and its pair of HELICAL gears and pair of SPIRAL BEVELS provides an overall gear ratio of 1:1

http://vintagemachinery.org/pubs/2097/16366.pdf
 
FWIW, a number 2 drive gear is 5.3" OD, has 28 teeth and is 1.5" wide.
The back of the gear is 1.4" from the column face.
The driven gear is about 3.7" OD and has 19 teeth.
Hope this helps.
 








 
Back
Top