simonsaelaert
Plastic
- Joined
- Jul 24, 2017
Hi,
Last week i found at a retiring machine dealer a cincinnati contourmaster in excellent condition. It had 50 years of crud on it but underneath there was a hardly used copying mill with shaper attachment.
I cleaned and oiled it up, changed the wipers did a few test cuts and it works great.
Are there people out there that worked with these machines or maybe someone who has a manual. Figuring the copying atachment out would be a lot easyer with some help.
Also what grease and oil is recommended would be greatly appriciated.
Thanks
Simon
Verstuurd vanaf mijn SM-N770F met Tapatalk
Last week i found at a retiring machine dealer a cincinnati contourmaster in excellent condition. It had 50 years of crud on it but underneath there was a hardly used copying mill with shaper attachment.
I cleaned and oiled it up, changed the wipers did a few test cuts and it works great.
Are there people out there that worked with these machines or maybe someone who has a manual. Figuring the copying atachment out would be a lot easyer with some help.
Also what grease and oil is recommended would be greatly appriciated.
Thanks
Simon
Verstuurd vanaf mijn SM-N770F met Tapatalk